Zigbee

Sort By:  
Emulator for downloading & debugging CC2530/CC2540 (H2 UDL-001)

TI CC2530/CC2540 Emulator


Technical Data

  • USB2.0 Interface
  • 10 Pins Flat-Cable
  • LED Indicator on PCB Board
  • Reset Button
  • Compatible to SmartRF Studio, SmartRF Flash Programmer, IAR For 8051, PurePath Wireless
  • Instruction is here


CC2530/CC2540 Emulator
Add to Cart
18.00€
ZigBee CC2530 + C8051 USB Dongle- Packet sniffer (Z-USB-PS2530)

*We can not accept international order online with the flat-Rat shipping cost. If you want order from out of Germany, please contact us contact@h-2technik.com. Thank you for your understanding.


ZigBee CC2530+C8051 USB Dongle-Packet Sniffer 
 Manual to Download

Technical Data

  • C8051F320 on-board USB2.0
  • TI CC2530 chipset
  • 2.4G RF with PCB Antenne
  • Transmission up to 1Mbps
  • 4.8 x 1.8 cm
  • LED indicator on PCB Board
  • Software for free downloading
Zigbee Packet Sniffer with CC2530, C8051 MCU
Add to Cart
13.00€
Z-003 UART to Zigbee Converter (PCB Antenna, max. 60m ) (Z-003)

H2 Z-003 ( TI CC2530F256 )

Manual to Download

*We can not accept international order online with the flat-Rat shipping cost. If you want order from out of Germany, please contact us contact@h-2technik.com. Thank you for your understanding.


Default Firmware(UART to Zigbee)
  • UART Default Parameters: 38400(Baudrate), None(Parity Bit), 8(Data Bits), 1(Stop Bit)
  • Support AT Command (e.g. Setting or Querying :  Roles, Baudrate, Transmission Power and so on)
  • Other Firmware can be pre-downloaded (e.g. CC2530_router) before delivered. Please send us the Firmware Link. 


Technical Data

  • PCB Layers: 4
  • size: 22.3 * 15.1 mm
  • Interface: 1.27 mm interval pin
  • Material: RF special materials
  • Receiver sensitivity: -96 dBm
  • Input DC voltage: 2.1 ~ 3.6V (3.3v recommended)
  • Antenna: PCB on board
  • Transmission rate: max. up to 250 kbps
  • Transmission distance: 60m
  • Configuration Script: AT command
  • Transmission power: Receiving status < 50mA, Emiting status <110mA
  • ZigBee protocol: ZigBee2007/PRO(Z-Stack)
  • Transparent serial data transmission

Lieferung aus Deutschland / kostenlos Resourcen zu download / kostenlose Beratung

Add to Cart
8.15€
ZigBee CC2531 USB Dongle- Packet sniffer (Z-USB-PS2531)

*We can not accept international order online with the flat-Rat shipping cost. If you want order from out of Germany, please contact us contact@h-2technik.com. Thank you for your understanding.


ZigBee CC2531 USB Dongle-Packet Sniffer 
 Manual to Download

Technical Data

  • TI CC2530 chipset
  • 2.4G RF with PCB Antenne
  • 4.8 x 1.5 cm
  • LED indicator on PCB Board
  • Button on PCB Board
  • CC Debugger download connector
  • Zigbee Packet Sniffer Firmware
Zigbee Packet Sniffer with CC2531
Add to Cart
17.00€
Z-004 UART to Zigbee Converter (max. 1000m ) (Z-004)

H2 Z-004 (  TI CC2530F256 + CC2591 )

Manual to Download

*We can not accept international order online with the flat-Rat shipping cost. If you want order from out of Germany, please contact us contact@h-2technik.com. Thank you for your understanding.


Default Firmware(UART to Zigbee)
  • UART Default Parameters: 38400(Baudrate), None(Parity Bit), 8(Data Bits), 1(Stop Bit)
  • Support AT Command (e.g. Setting or Querying :  Roles, Baudrate, Transmission Power and so on)
  • Other Firmware can be pre-downloaded (e.g. CC2530_router) before delivered. Please send us the Firmware Link. 

Technical Data

  • PCB Layers: 4
  • size: 34.0 * 15.1 mm
  • Material: RF special materials
  • Receiver sensitivity: -96 dBm
  • Input DC viltage: 2.1 ~ 3.6V (3.3v recommended)
  • Antenna: 2.4G antenna with IPEX interface
  • Transmission rate: max. up to 250 kbps
  • Transmission distance: max. 1000m (with 3 dBi antenna)
  • Configuration Script: AT command/PC Software
  • ZigBee protocol: ZigBee2007/PRO (Z-Stack)

schnelle Lieferung aus Deutschland / kostenlos Resourcen zu download / kostenlose Beratung

Add to Cart
13.50€
Z-001 UART to Zigbee Converter with CC2530 (max. 200m ) (Z-001)

H2 Z-001( TI CC2530 )

Manual to Download


*We can not accept international order online with the flat-Rat shipping cost. If you want order from out of Germany, please contact us contact@h-2technik.com. Thank you for your understanding.

Default Firmware(UART to Zigbee)
  • UART Default Parameters: 38400(Baudrate), None(Parity Bit), 8(Data Bits), 1(Stop Bit)
  • Support AT Commands (e.g. Setting or Querying :  Roles, Baudrate, Transmission Power and so on)
  • Other Firmware can be pre-downloaded (e.g. CC2530_router) before delivered. Please send us the Firmware Link. 


Technical Data

  • PCB Layers: 4
  • size: 36.5 * 27.8 mm
  • Material: RF special materials
  • Receiver sensitivity: -96 dBm
  • Input DC viltage: 2.1 ~ 3.3V
  • Antenna: 2.4G antenna with SMA interface
  • Transmission rate: max. up to 250 kbps
  • Transmission distance: 200m(with 3 dBi antenna)
  • Transmission power: Receiving status <50mA, Emiting status<110mA
  • ZigBee protocol: ZigBee2007/PRO (Z-Stack)
  • Support UART configuration commands
  • Transparent serial data transmission
Add to Cart
12.50€
Zigbee Development Kit (compatible to Z-001 or Z-002 ) (Z-DB001)

H2 Zigbee Development Kit (H-2 Technik UG)

Manual to Download

Technical Data

  • programble Buttons and LEDs for testing on Z-DB001 (base board)
  •  Core Zigbee Module Z-001 (CC2530)
  • Emulator for downloading and debugging
  • USB to TTL for monitoring UART interface (with 4 x Dupont cables)
  • USB/DC2.1(5v) Power supply on base board (Power Cable is in package)
  • Battery slot (3.7v) on base board
  • Sensor modules (Datenerfassungsmodulen) als optional
  • CP2102 on base board
  • Power supply LED and network LED on base baord

Delivery Range:

  • 1xZ-DB001(base board)
  • 1xZ-001(CC2530)
  • 1xEmulator (Z-T00-E)
  • 1xTU-001(USB2UART)
  • 1xUSB Cable, 1x2.4G Antenne, 4xDupont Cable
  • 3 Sensors ( Relay, Smoke, Temperatur)

Z-DB001 Development Board and Tools
Add to Cart
53.00€
Z-002 UART to Zigbee Converter with CC2530 and CC2591 (max. 700m) (Z-002)

H2 Z-002( TI CC2530 )

Manual to Download


*We can not accept international order online with the flat-Rat shipping cost. If you want order from out of Germany, please contact us contact@h-2technik.com. Thank you for your understanding.


Default Firmware(UART to Zigbee)
  • UART Default Parameters: 38400(Baudrate), None(Parity Bit), 8(Data Bits), 1(Stop Bit)
  • Support AT Command (e.g. Setting or Querying :  Roles, Baudrate, Transmission Power and so on)
  • Other Firmware can be pre-downloaded (e.g. CC2530_router) before delivered. Please send us the Firmware Link. 



Technical Daten

  • PCB Layers: 4
  • size: 36.0 * 25.6 mm
  • Material: RF special materials
  • Receiver sensitivity: -96 dBm
  • Input DC viltage: 2.1 ~ 3.3V
  • Antenna: 2.4G antenna with SMA interface
  • Transmission rate: max. up to 250 kbps
  • Transmission distance: 700m (with 3 dBi antenna)
  • Transmission power: Receiving status <50mA, Emiting status<110mA
  • ZigBee protocol: ZigBee2007/PRO (Z-Stack)
  • Support UART configuration commands
  • Transparent serial data transmission
Add to Cart
13.50€
Per Page      1 - 8 of 8
  • 1