Z-002 UART to Zigbee Converter with CC2530 and CC2591 (max. 700m)


H2 Z-002( TI CC2530 )

Manual to Download

*We can not accept international order online with the flat-Rat shipping cost. If you want order from out of Germany, please contact us contact@h-2technik.com. Thank you for your understanding.

Default Firmware(UART to Zigbee)
  • UART Default Parameters: 38400(Baudrate), None(Parity Bit), 8(Data Bits), 1(Stop Bit)
  • Support AT Command (e.g. Setting or Querying :  Roles, Baudrate, Transmission Power and so on)
  • Other Firmware can be pre-downloaded (e.g. CC2530_router) before delivered. Please send us the Firmware Link. 

Technical Data

  • PCB Layers: 4
  • size: 36.0 * 25.6 mm
  • Material: RF special materials
  • Receiver sensitivity: -96 dBm
  • Input DC voltage: 2.1 ~ 3.3V
  • Antenna: 2.4G antenna with SMA interface
  • Transmission rate: max. up to 250 kbps
  • Transmission distance: 700m (with 3 dBi antenna)
  • Transmission power: Receiving status <50mA, Emiting status<110mA
  • ZigBee protocol: ZigBee2007/PRO (Z-Stack)
  • Support UART configuration commands
  • Transparent serial data transmission
*********If Power converter (AC140-220V to DC3.3V) is required, please refer to article DC3.3V Power Supply*********

  • Availability: In Stock
  • Model: Z-002
  • Manufacturer: H-2 Technik

Write Review

Note: Do not use HTML in the text.